Product ID:SCOTCH SPRAY MOUNT ARTIST'S ADHESIVE
MSDS Date:01/01/1987
FSC:8040
NIIN:00-171-1535
MSDS Number: BBPLM

3M CENTER/ST. PAUL, MN 55144

Emergency Phone: (612) 733-1110

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

ACRYLIC RESIN (SEE SUPPLEMENTAL FOR INGREDIENTS)

Fraction By Weight: <8%

TERPENE RESIN BLEND

Fraction By Weight: <8%

ISOBUTANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 37.0%

METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: 55.0%

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

1,4-DIOXANE (DIETHYLENE DIOXIDE) (SARA III)

CAS: 123-91-1

RTECS: JG8225000

OSHA PEL S, 100 PPM

ACGIH TLV: S, 25 PPM; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Effects of
Overexposure:DIZZINESS/NAUSEA/HEADACHE/UNCONSCIOUSNESS/DEATH.
EYE/SKIN CONTACT: MAY CAUSE IRRITATION.

First Aid:EYE: FLUSH W/WATER FOR AT LEAST 15 MINUTES. SKIN: WASH WITH
SOAP/WATER. INHALATION: MOVE VICTIM TO FRESH AIR. RESTORE OR
SUPPORT BREATHING AS NECESSARY. IF SWALLOWED: DON'T INDUCE
VOMITING. DRINK 2 GL ASSES MILK OR WATER. CALL A PHYSICIAN.

Flash Point:-50F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:SCBA WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
Unusual Fire/Explosion Hazard:FLAMMABLE. OVERHEATED, CLOSED CONTAINERS
ADJACENT TO FIRE COULD EXPLODE DUE TO PRESSURE BUILDUP.

Spill Release Procedures:IF ANY CANS RUPTURE, EXTINGUISH ALL IGNITION
SOURCES/VENTILATE THE AREA. USE ABSORBE MATERIAL AS NEEDED IN
CLEANUP PROCEDURE. PLACE CAN IN AN APPROVED U.S. PT. OF
TRANSPORTATION CONTAINERS.

Handling and Storage Precautions:AVOID PROLONGED BREATHING OF VAPORS
AND OVERSPRAY DURING APPLICATION. AVOID CONTACT WITH EYE/SN.
Other Precautions:AVOID VAPOR CONTACT W/OPEN FLAMES, WELDING ARCS OR
HIGH TEMP SOURCES WHICH MIGHT CAUSE VAPOR DECOMPOSITION TO PRODUCE
HARMFUGASES.

Respiratory Protection:USE ONLY IN AREAS ADEQUATELY VENTILATED
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV/LEL
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
MSDS DATE: 16 DEC 1985. ALSO CONTAINS: PLASTICIZER (1000264PL) <8.0%.

Vapor Density:4.6
Evaporation Rate & Reference:(ETHER = 1): .4
Solubility in Water:NIL
Appearance and Odor:TRANSLUCENT LIQUID: SWEET ODOR.
Percent Volatiles by Volume:92%

Stability Indicator/Materials to Avoid:YES
DON'T PUNCTURE OR INCINERATE
Stability Condition to Avoid:DON'T STORE AT TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:HCL/CHLORINE/PHOSGENE WHEN SUBJECTED
TO EXCESS. HEAT/FLAME

Waste Disposal Methods:DON'T PUNCTURE IN INCINERATE CAN IN HOUSEHOLD
INCINERATOR. INCINERATE PROPERLY IN ACCORDANCE W/APPLICABLE
REGULATIONS AS THE PRODUCT CONTAINS HALOGENS. EMPTY CONTAINERS MAY
BE DISPOSED IN A SANITARY L ANDFILL IN ACCORDANCE W/LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.